How to connect Aftershokz to iPhone

Whether you recently received your headphones, acquired a new phone, or lost connectivity, it helps to know how to pair your AfterShokz with your iPhone. This article will help you to know how to connect afterAhokz to iPhone. Moreover, it will also provide you with a guide to disconnect Aftershokz from your iPhone. We will use lots of photographs to assist you.

How to connect Aftershokz to iPhone

To connect Aftershokz to iPhone, you have to pair the devices. You have to set up the pairing mood from the Aftershokz headphone. As well as, you have to pair the headphone with your iPhone. Follow the steps below to connect Aftershokz to your iPhone.

Connecting Aftershokz headphone to iPhone
Connecting Aftershokz headphones to iPhone
  1. Press and hold the volum+ or power button for 4 to 6 seconds to enable the pairing mood.
  2. Audrey’s voice prompter will announce “pairing” when the pairing mood turns on while the LED light flashes red and blue.
  3. Once you’re in pairing mode, go to the Bluetooth settings of your iPhone and choose your headphone from the list. You will see the Aftershokz headphone on your list.
  4. Tap over the Aftershokz headphone. And you are done.

How to disconnect Aftershokz headphones from iPhone

Disconnecting Aftershokz headphones from iPhone is easier than connecting. You need to disconnect Aftershokz headphones for various purposes. Say if you want to connect any other headphones or if you want to disconnect and connect Aftershokz, you need to know the way to disconnect Aftershokz headphones from your iPhone. Follow the steps below to do this.

  1. Go to the setting of your iPhone
  2. Tap on the Bluetooth
  3. Choose your Aftershokz headphone device and tap on it
  4. Then tap on the forget this device

How to reset AfterShokz Headphones?

To reset AfterShokz Headphones, follow these steps:

  • Press and hold the power button on your AfterShokz headphones and the volume up and volume down keys for 4-5 seconds.
  • You will now hear a beep sound or feel vibrations on your headset.
  • Turn off your headphones right now.

Your AfterShokz headphones have been successfully reset and are ready to be linked with your smartphone. When you reinstall the AfterShokz headphones, you must reconnect them to all of the devices to which they were previously connected. Please follow the procedures mentioned on this page.

How to pair AfterShokz headphones with a Mac?

iPhone and Mac are the products of Apple. You can use AfterShokz headphones on different devices apart from your iPhone. You should learn to connect when you have a Mac and Aftershokz headphones. In order to pair AfterShokz headphones with a Mac, follow the steps below:

  • Turn on your AfterShokz headphones. Hold down the volume up button for at least 5-10 seconds.
  • This will activate the pairing mode on the headphones.
  • Turn on the MacBook or iMac.
  • An Apple logo appears on the top left-hand side of the screen.
  • Click on it, then choose System Preferences.
  • Locate the Bluetooth icon and click it to enter the Bluetooth page.
  • When you turn on Bluetooth, you may now look for new Bluetooth devices.
  • Your MacBook will now begin to look for nearby Bluetooth devices.
  • When it detects the AfterShokz Bluetooth headset, click on it to begin the connection procedure.
  • Once the headset and the MacBook are linked, click Ok.
  • This completes the pairing procedure between the AfterShokz headphone and a Mac.

How to pair AfterShokz headphones with Smart TV?

To connect AfterShokz headphones to your Smart TV, follow these steps:

  • Turn on the AfterShokz headphones and put them in pairing mode by following the outlined instructions.
  • Turn on the Smart TV and, using the remote, navigate to the Settings or Device menu.
  • You must now seek connection or Bluetooth settings.
  • When you turn on the TV Bluetooth, it will look for Bluetooth devices.
  • You may use your headphones with the TV after the pairing is complete.
  • In rare cases, you may need to stop audio output from the TV speakers in order to hear the output through the AfterShokz headphones.

This may be accomplished via the Audio or Sound settings. If your TV lacks Bluetooth, you can connect a Bluetooth transmitter/adaptor.

How to pair AfterShokz headphones to Android?

To connect the AfterShokz wireless headphones to an Android device, follow these steps:

  1. Turn on the AfterShokz headphones and activate the pairing mode.
  2. Navigate to the Settings menu on your Android smartphone.
  3. Locate the Bluetooth options and enable Bluetooth.
  4. When you do, you will see a list of previously linked devices. If you don’t see the AfterShokz, keep an eye out for new gadgets.
  5. When the phone detects the headphones, it will begin looking for them and listing them there.
  6. When the name appears in the list, click it to choose it. Then choose Pair.
  7. When the pairing is complete, you will receive a notice on your phone and, most likely, on your headphones.

How can I connect AfterShokz to more than one device?

AfterShokz headphones provide multipoint pairing, allowing users to connect to two devices simultaneously. While you will not be able to hear audio from both devices simultaneously, you will be able to simply choose between them.

To couple several devices using multipoint pairing, follow these steps:

  • Begin by turning off your headphones.
  • To enter pairing mode, press and hold the volume+/power button for 3-6 seconds, or until the LED light flashes red and blue.
  • Hold down the multifunction and volume+/power buttons for 3-6 seconds. “Multipoint Enabled,” Audrey says.
  • Connect the first device. “Connected,” Audrey says.
  • Remove your headphones.
  • Re-enter pairing mode by holding down the volume+ button for 3-6 seconds or until the LED light flashes red and blue.
  • Connect the second device. “Device Two Connected,” Audrey states.
  • Remove your headphones.

These devices should now be linked with your headphones.

How to connect AfterShokz headphones to the smartwatch

It is also simple to connect Aftershokz headphones to smartwatches that contain music. As both devices support Bluetooth, you can connect them together. To connect AfterShokz headphones to the smartwatch, follow the steps below.

  1. Go to the setting of your smartwatch
  2. Then go to the Bluetooth
  3. Tap on find devices
  4. Tap on the AfterShokz headphone from the list
  5. Then tap on the pair


We’re here to assist, and we hope you’ve been able to pair your AfterShokz headphones with various devices by following the instructions above. If you have any problems with the AfterShokz headphones, restart them and see if they function. If they don’t, the above-mentioned manual reset procedure should address most of the wireless headphones’ problems.